Rabbit HX 1360 Driver Download: A Step-by-Step Guide

If you have a Rabbit HX 1360 cutting plotter, you may need to download and install the driver for it to work properly with your computer. The driver is a software that allows your computer to communicate with your plotter and send commands to it. Without the driver, your plotter may not function correctly or at all.

In this article, we will show you how to download and install the Rabbit HX 1360 driver for Windows 10 in a few easy steps. Follow along and get your plotter up and running in no time.

Step 1: Download the Rabbit HX 1360 Driver

The first step is to download the Rabbit HX 1360 driver from the official website of Jinan King Rabbit Technology Development Co., Ltd., the manufacturer of the plotter. You can find the driver in the Download section of their website, under the category of Rabbit USB Driver for Cutting Plotter. The file name is 3.rar and it has a size of 124 KB.

Alternatively, you can use this direct link to download the driver: https://www.hxlaser.com/down/show-328.html

Once you have downloaded the file, save it to a location on your computer where you can easily find it later.

Step 2: Extract the Rabbit HX 1360 Driver

The next step is to extract the Rabbit HX 1360 driver from the compressed file that you downloaded. The file is in RAR format, which means you need a software that can open and extract RAR files, such as WinRAR or 7-Zip.

To extract the driver, right-click on the file and choose Extract Here or Extract to 3/ depending on your software. You should see a folder named 3 with three files inside: CH341SER.EXE, CH341SER.INF and CH341SER.SYS. These are the files that contain the driver for your plotter.

Step 3: Install the Rabbit HX 1360 Driver

The final step is to install the Rabbit HX 1360 driver on your computer. To do this, follow these steps:

Connect your plotter to your computer using a USB cable.
Turn on your plotter and wait for a few seconds.
Your computer should detect your plotter and try to install the driver automatically. However, if this does not happen or if you see an error message saying that the driver is not found or not compatible, you need to install it manually.
To install the driver manually, go to the folder where you extracted the driver files and double-click on CH341SER.EXE. This will launch a setup wizard that will guide you through the installation process.
Follow the instructions on the screen and click Next until you reach the end of the wizard. You may need to accept some terms and conditions or allow some permissions during the installation.
When the installation is complete, click Finish and close the wizard.
Your plotter should now be ready to use with your computer.

Conclusion

How to Use the Rabbit HX 1360 Cutting Plotter

Now that you have installed the driver for your plotter, you can start using it to create and cut various designs. To use the plotter, you need a software that can send commands to it, such as CoCut Pro XT, Flexi 7.1 or Artcut 2006. These software allow you to design your graphics, adjust the cutting settings and send the data to your plotter.

To use the plotter with any of these software, follow these general steps:

Launch the software and create or open your design.
Select your plotter from the list of devices and choose the appropriate port (usually USB).
Adjust the cutting parameters, such as speed, force, offset and blade type.
Load the material that you want to cut on your plotter and align it properly.
Send the design to your plotter and wait for it to finish cutting.
Remove the material from your plotter and weed out the excess parts.

For more specific instructions on how to use each software with your plotter, please refer to their respective manuals or online tutorials.

Troubleshooting Tips for the Rabbit HX 1360 Cutting Plotter

If you encounter any problems with your plotter or the driver, here are some tips that may help you solve them:

If your plotter does not respond or cuts incorrectly, check the connection between your computer and your plotter. Make sure the USB cable is plugged in securely and there are no damages or interferences. You may also try using a different USB port or cable.
If your computer does not recognize your plotter or shows an error message when installing the driver, check the compatibility of your operating system and the driver. The driver that we provided in this article is for Windows 10 only. If you have a different operating system, you may need to download a different driver from the manufacturer’s website or contact their customer service for assistance.
If your plotter cuts too deep or too shallow, check the blade condition and the cutting force. Make sure you are using a suitable blade for your material and that it is not dull or broken. You may also need to adjust the cutting force according to the thickness and hardness of your material.
If your plotter cuts inaccurately or skips parts of your design, check the offset and the speed. The offset is the distance between the tip of the blade and the center of the blade holder. You may need to calibrate it according to your blade type and size. The speed is how fast your plotter moves while cutting. You may need to lower it if your design is complex or detailed.

If none of these tips work, you may need to contact the manufacturer or a professional technician for further support.

Benefits of Using the Rabbit HX 1360 Cutting Plotter

The Rabbit HX 1360 cutting plotter is a versatile and reliable device that can help you create various projects with ease and precision. Here are some of the benefits of using this plotter:

It has a large cutting area of 1360 mm (53.5 inches) by 2500 mm (98.4 inches), which allows you to cut a wide range of materials and sizes.
It has a high cutting speed of up to 800 mm/s (31.5 inches/s), which enables you to finish your projects faster and more efficiently.
It has a high cutting force of up to 500 g, which enables you to cut through thick and hard materials, such as vinyl, cardstock, leather and rubber.
It has a digital servo motor and a micro-step driver, which ensure smooth and accurate cutting performance and low noise level.
It has an LCD display and a control panel, which allow you to adjust the cutting settings and monitor the status of your plotter easily.
It has a memory buffer of 4 MB, which allows you to store multiple files and commands on your plotter without connecting to your computer.
It supports various cutting formats, such as DMPL, HPGL and HPGL-2, which make it compatible with most cutting software on the market.

Reviews of the Rabbit HX 1360 Cutting Plotter

If you are still not convinced that the Rabbit HX 1360 cutting plotter is the right choice for you, you may want to read some reviews from other users who have tried it. Here are some excerpts from online reviews that we found:

“I have been using this plotter for over a year now and I am very happy with it. It cuts very well and fast, and it is easy to set up and use. I use it mainly for vinyl decals and stickers, but I have also tried it with other materials like paper and fabric. It works great with all of them. The driver installation was simple and straightforward, and I have not had any issues with it. I would recommend this plotter to anyone who needs a reliable and affordable cutting device.”

“This plotter is amazing. It cuts like butter and it is very accurate. I use it for making signs, banners, labels and more. It can handle any material that I throw at it. The driver was easy to download and install, and it works well with my software. The plotter is also very sturdy and durable. I have dropped it a few times and it still works fine. The only thing that I wish it had was a stand, but that is not a big deal. Overall, this is a great plotter for the price.”

“I bought this plotter as a hobbyist and I am very impressed with it. It cuts very smoothly and precisely, and it is very fast. I use it for making stickers, cards, scrapbooks and other crafts. It can cut any material that I want, from vinyl to leather. The driver was a bit tricky to install, but once I figured it out, it worked perfectly. The plotter is also very easy to operate and maintain. It has a nice LCD screen and a control panel that let me adjust the settings without using my computer. The plotter is also very quiet and does not make much noise. I love this plotter and I would highly recommend it.”

How to Buy the Rabbit HX 1360 Cutting Plotter

If you are interested in buying the Rabbit HX 1360 cutting plotter, you may wonder where and how to get it. Here are some options that you can consider:

You can buy it directly from the manufacturer’s website. You can find the product details, specifications and prices on their website, and you can also contact them for any inquiries or orders. The website is https://www.hxlaser.com/.
You can buy it from online platforms that sell cutting plotters and related products. Some examples are Alibaba, Amazon and eBay. You can compare different sellers, prices and shipping options on these platforms, and you can also read customer reviews and ratings before making a purchase.
You can buy it from local distributors or dealers that carry the Rabbit brand. You can find a list of authorized distributors and dealers on the manufacturer’s website, or you can search online for the nearest one in your area. You can visit their physical stores or websites and check their availability and prices.

Whichever option you choose, make sure that you buy from a reputable and trustworthy source, and that you get a warranty and after-sales service for your plotter.

FAQs about the Rabbit HX 1360 Cutting Plotter

Here are some frequently asked questions and answers about the Rabbit HX 1360 cutting plotter that may help you learn more about it:

What is the difference between the Rabbit HX 1360 and the Rabbit HX 1360N?: The Rabbit HX 1360N is an upgraded version of the Rabbit HX 1360. The main difference is that the Rabbit HX 1360N has a network port that allows you to connect your plotter to your computer via Ethernet cable or Wi-Fi. This makes it more convenient and flexible to use your plotter with multiple computers or devices.
What are the accessories that come with the Rabbit HX 1360?: The Rabbit HX 1360 comes with a power cord, a USB cable, a blade holder, three blades, a pen holder, a plotter pen, a serial cable, a CD-ROM with driver and software, a user manual and a warranty card.
How do I update the firmware of my Rabbit HX 1360?: To update the firmware of your plotter, you need to download the latest firmware file from the manufacturer’s website and save it to your computer. Then, you need to connect your plotter to your computer via USB cable and turn it on. Next, you need to run the firmware update tool that is included in the CD-ROM or on the website. Finally, you need to follow the instructions on the screen and wait for the update to complete.

86646a7979